One of the first set of questions beginning homebrewers have is: "What should I ferment my beer in?", "What are the different types of fermenters available?", "Is one fermenter better than the other?" and "What does a fermenter cost?".
Selecting a primary fermentation vessel that will convert your wort into beer and act as a place for your yeast to go to work in is not always a trivial task. There are many options ranging from the very inexpensive plastic bucket all the way up to the primium stainless steel conical tanks.
Choosing the best fermentation tank that's right for you and your budget involves examining the options. This two-part article will help you get an idea of the variety of fermentation equipment that's available out on the market today. In this article, part one, you'll read about the more common and less expensive fermenters.
What size fermenter do I need?
Homebrew beer batches come in all sizes ranging from he sub-2 gallon test batches all the way up to 100 gallon super batches for those ready to turn pro. The size of fermenter you need will be based on how much beer you want to produce and how active of a fermentation you expect.
The typical beginning homebrew batch is 5 gallons. Your fermenter will need to hold a bit more than that in order to handle the build-up of yeast, foam and other by-products of the fermentation process. Typically you'll want to minimize the air-space between the beer and the top of the fermenter, especially in a secondary fermenters, where excess air can spoil the taste of your beer.
Typical starter fermenter sizes are: 3 gallon, 5 gallon, 6 gallon, and 6.5 gallon. More advanced models range from 7 gallon, 14.5 gallon, 26 gallon and up to over 52 gallon tanks.
Normally, you'll want a fermenter that is slightly larger than your batch size. Example: a 3 gallon bucket for a 2 gallon batch, a 6 gallon bucket for a 5 gallon batch, etc. The closer your batch size is to your fermenter size the less air will stay on top of your beer. However, you'll want a bit of extra room in the primary for all that foam and other blow-off materials as active fermentation can become quite lively.
What types of fermenters are there?
There are nearly a dozen or so types of common fermenters or fermentation vessels available on the market today. They range from food grade plastic buckets, P.E.T. plastic carboys, glass carboys, high density polyethylene containers (HDPE)and all the way up to converted Sanke kegs and stainless steel containers in both conical and non-conical shapes.
That's a lot of choices!
Each type of fermenter has it's own set of advantages and disadvantages. Your choice may depend on your budget, your comfort level with the equipment or the volume of beer you expect to produce. Let's take a look at these different types of fermenters individually. Let's start with the most basic containers in this article and work up to the more advanced models in part two.
Food-Grade Plastic Fermentation Buckets
One of the most economical fermentation devices you can get is the food-grade quality fermentation buckets. These buckets come ready to sanitize, are typically white in color, have a re-sealable lid and have a hole for some kind of air-lock or blow-off tube. Optionally, these buckets may have a hole near the bottom with an attached spigot for siphon-less draining.
Fermentation buckets, sometimes known as Ale Pails, typically come in the following sizes (all in gallons): 2, 6, 6.5, 7.5, 10, 12, 20, and 32. These buckets are made of food-grade heavy duty plastic and will generally last a long time provided that they are gently cleaned and kept in good condition.
Most beginning homebrew kits use these types of buckets. I have personally used these buckets in primary fermentations for extract batches and they have worked well. You can safely use these for a dozen batches or so before considering replacing them.
Cost: Typically a bucket with a lid costs anywhere from $6 for a 2 gallon size, $7-$15 for a 6 gallon size, $12-$19 for a 6.5 gallon size, $16-$22 for a 7.5 gallon size, and all the way up to $79 for a 32 gallon (trash barrel) container.
Advantages: They're light weight, safer to handle, relatively inexpensive and can be found in many places including kitchen supply stores and most homebrew shops. If dropped, a lesser risk for breakage and injury.
Disadvantages: Harder to keep clean, may scratch easily, the scratches could harbor bacteria that can ruin your beer. Some people claim beer fermented in plastic doesn't taste as good as beer made in glass or stainless steel fermenters. Risk of chemical leaching over time.
Extras: Spigot holes and kits cost extra ~$3.25 and airlocks cost around $1.25. Blow off tubes vary by size and length.
Price a plastic fermentation bucket online:
High Gravity Homebrew, Northern Brewer.
For years, glass carboys were the standard for fermenting home brewed beer. In the early days of homebrewing, these were the only things available. But even today, it's still considered a preferred container by many for fermenting small batches of beer.
Typical sizes of glass carboys are: 3 gallon, 5 gallon, 6 gallon and 6.5 gallon. Make no mistake, these bottles are much heavier than the previous plastic carboys. A 3 gallon glass bottle weighs 9 pounds, a 5 gallon (13 lbs), a 6 gallon (16 lbs) and the 6.5 gallon bottle (17.5 lbs). When you add 5 gallons of beer to this (roughly 48.1 pounds) a full 6.5 gallon glass carboy can weigh over 65 pounds!
Glass carboys can be found not only in homebrew stores but many drinking water supply companies also supply these. In many cases, used carboys are just as good as new ones as glass typically won't scratch on the inside and can last a very long time.
Cost: 3 gallon: $24+shipping, 5 gallon: $32+shipping, 6 gallon: $38+shipping, 6.5 gallon: $40+shipping. Shipping can cost up to $20 due to the weight and fragility of these items. You can find used carboys much cheaper in your local classifieds, just be sure used bottles don't have chips, cracks or leftover sludge.
Advantages: Many homebrewers swear beer from glass carboys tastes better than from plastic fermenters. There is less likelihood of oxygen getting into your beer. Glass is easier to clean than plastic and won't scratch. Glass has no chemicals to leach out into your beer. Glass carboys won't wear out as fast as plastic.
Disadvantages: The weight. Glass is highly breakable and can be dangerous if dropped. More light gets into glass than a plastic bucket and can change the taste of your beer. It costs a lot to ship these and can be more expensive than plastic bottles.
Price a glass carboy online:
High Gravity Homebrew, Northern Brewer.
Tuff Tank Vessels
Tuff Tank vessels have been around for several years and are available in a few larger scale sizes for fermentation. These tanks are sold through www.eckraus.com and offer a larger capacity along with a more affordable model. Tuff Tanks are made of food-grade high impact polymers.
The Tuff Tank Vessel provides an easy, convenient way to handle any type of fermentation. It comes with an air-lock and can be sealed up air-tight. This makes it effective as both a primary or secondary fermenter. Tuff-Tank vessels also have a handy faucet that can be used for both racking or bottling your beer. The faucet has been strategically elevated away from the very bottom so that you can easily transfer your beer without transferring the sediment.
Tuff Tank Vessels come in 3 different sizes: 9 gallon, 14 gallon and 22 gallon. There are also discounts available for ordering more than one at a time.
Cost: 9 gallon - $48, 14 gallon - $62, and $92 for the 22 gallon size. Shipping is free in some cases.
Advantages: Larger capacity than typical carboys. Air-tight. No light will get to your fermenting beer. Lighter weight than metal or glass fermenters. Comes with an air-lock and a spigot as standard.
Disadvantages: Polymers, like any other plastic, can scratch and could harbor bacteria. Not intended for small batches. May not have the same trust for taste as glass and stainless steel fermenters do.
Price a Tuff Tank Vessel:
E. C. Krause
End of Part One
In Part Two, we examine the higher end models including: MiniBrew conical HDPE fermenters, Converted Sanke kegs as fermenters, and Blichmann stainless steel fermenters. If you're ready to step up to a more advanced model - read on!
Continue reading Part Two.
- Choosing a brew kettle.
- Putting together the home brewery.
- Creating a yeast starter for homebrewing.
This article came from FermentedlyChallenged.com. Like what you read? Subscribe to the latest articles by email here.
Sunday, November 29, 2009
Topic Categories: Homebrewing